2031 - dbx by Harman 2031 Single 31 Band Equalizer, 2U 19"...
- Part Number:
- 2031
- Model Number:
- 2031
- Make:
- DBX BY HARMAN
- Lead Time:
- Available
- Qty In Stock:
- Available
dbx by Harman 2031 Single 31 Band Equalizer, 2U 19" | EQ Series DBX 2031 Graphic Equalizer/Limiter with Type III - hreshold range of 0dbu to plus 20dbu, patent-pending PeakPlus limiter, Revolutionary instant encode/decode Type III Noise Reduction, Status LEDs offer visual feedback for all settings on the front panel Simple Type: Audio Processing & Recording
It's amazing. One little button. So much effect. dbx Type III Noise Reduction is an entirely new concept... virtually instantaneous encode/decode within the circuitry of the box. We started out to build the finest EQs possible, boxes with the heritage and performance to rival our famous 30 Series EQs. And to no one's surprise they came out awfully darn good. (Ask to see the Audio Precision plots compared to the competition.) But then, Roger (our chief engineer, a nice guy, as far as engineers go) got the crazy idea of putting this new noise reduction stuff in the box. We listened to it and were amazed. The EQs sounded great without it but with it the performance was nothing short of incredible. Check it out yourself and see. But hey, Roger wasn't about to stop there. PeakPlus Limiter. Who knows more about limiting than the folks at dbx; nobody... that's who. So when the guys were developing this new series of EQs they wanted something that would be unique to these EQs. That's when Roger got another one of his bright ideas and said "I bet they'll work a lot better if there's a cool limiter built in." Next thing you know, all the guys are in the studio amazed at the new limiter Roger had designed specially for the 20 Series. Once again, hearing is believing... With a threshold range of 0dbu to plus 20dbu, the patent-pending PeakPlus limiter is designed to tame your program material from the subtlest nuances to the rowdiest hits. Also, the four stage LED ladder gives you a great visual indication as to what the limiter is doing. 20 Series EQs. You used to have to settle for second best in a reasonably priced EQ but not any more. With the new 20 Series from dbx® Professional Products you get a great EQ circuit, a graceful yet powerful limiter and the revolutionary new design of the Type III Noise Reduction. Check out the dbx 20 Series graphic EQs at your pro audio outfitter. You'll see, with the 20 Series EQs you get MORE!!!
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- An extremely high quality EQ, patent-pending Type III Noise Reduciton, and the elegant new PeakPlus Limiter all in one great sounding box
- Four segment LED bargraph for BOTH Gain Reduction AND Output Level offers the most comprehensive visual feedback available
- Patent-pending PeakPlus Limiter threshold range from 0dBu to +24dBu (off) can transparently tame the wildest hits or the subtlest nuances of any signal
- Revolutionary instant encode/decode Type III® Noise Reduction in-circuit at the push of a button. Increases S/N ratio by up to 20dB
- Status LEDs offer visual feedback for all settings on the front panel
Specifications
- Bandwidth: 20Hz to 20kHz, +/-0.5dB
- Clip: Red LED
- Dimensions: 3.5" H X 19" W X 7.9" D (8.9cm x 48.3cm x 20.1cm)
- EQ Bypass: Bypasses the graphic equalizer section in the signal path
- Frequency Response: <10Hz to >50kHz, +0.5/-3dB
- Indicators +/-15dB range: Red LED
- Indicators +/-6dB range: Yellow LED
- Indicators EQ Bypass: Red LED
- Indicators Gain Reduction Meter: 4-LED bar graph (all Red) at 0, 3, 6, and 10dB
- Indicators Low Cut Active: Red LED
- Indicators Output Level Meter: 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu
- Indicators Type III NR Active: Yellow LED
- Input CMRR: >40dB, typically >55dB at 1kHz
- Input Connectors: 1/4” TRS, female XLR (pin 2 hot), and barrier terminal strip
- Input Connectors: 1/4” TRS, male XLR (pin 2 hot), and barrier terminal strip
- Input Impedance: Balanced 200O, unbalanced 100O
- Input Impedance: Balanced 40kO, unbalanced 20kO
- Input Type: Electronically balanced/unbalanced, RF filtered
- Input Type: Impedance-balanced/unbalanced, RF filtered
- Low Cut (recessed): Activates the 40Hz 18dB/octave Bessel high-pass filter
- Mains Connection: IEC receptacle
- Max Input Level: >+21dBu balanced or unbalanced
- Max Output Level: >+21dBu balanced/unbalanced into 2kO or greater >+18dBm balanced/unbalanced (into 600O)
- Noise Reduction: Up to 20dB of dynamic broadband noise reduction
- Noise Reduction In (+/-6 and +/-15dB range) Dynamic Range: >112dB, unweighted
- Noise Reduction In (+/-6 and +/-15dB range) Signal-to-Noise: >94dB, unweighted, ref: +4dBu, 22kHz measurment bandwidth
- Noise Reduction Out(+/-15dB range) Dynamic Range: >108dB, unweighted
- Noise Reduction Out(+/-15dB range) Signal-to-Noise: >90dB, unweighted, ref: +4dBu, 22kHz
- Noise Reduction Out(+/-15dB range) THD+Noise: <0.04%, 0.02% typical at +4dBu, 1kHz
- Operating Voltage: 100VAC 50/60Hz, 120VAC 60Hz, 230VAC 50/60Hz
- Power Consumption: 12W
- Range (recessed): Selects either +/- 6dB or +/- 15dB slider boost/cut range
- Shipping Weight: 9.5 lbs. (4.3 kg)
- Type III NR: Activates dbx Type III Noise Reduction
- Weight: 8.5 lbs. (3.9 kg)
Applications
- None Available
Aliases
- None Available
