DBX Industrial Partner

376 - dbx by Harman 376 Tube Pre-amp Channel strip with Digital...

larger image

Request Quote
For Price
Part Number:
376
Model Number:
376
Make:
DBX BY HARMAN
Lead Time:
Available
Qty In Stock:
Available

dbx by Harman 376 Tube Pre-amp Channel strip with Digital Output | Silver Series DBX 376 Tube Channel Strip w/Digital Out - Selectable mic/line switch +48 Volt phantom power, Compressor, De-Esser, Front panel instrument input, AES/EBU, and S/PDIF Simple Type: Audio Processing & Recording

The standard of excellence for channel strip processors has just been raised once again. From the world leader in digital signal processing comes the new 376 Tube Channel Processor with digital output capabilities. dbx Professional Products has been paving the way for audio excellence for more than 25 years, and with the creation of the 376, the drive continues. The 376 has taken the essential tools needed for channel strip processors and has greatly added to the feature list, making it an all inclusive toolbox that offers all of the effects required. With an effect menu list that includes such standard features as: a tube preamp section, 3-Band parametric EQ section, Compressor, De-Esser and digital outputs, the 376 is the perfect companion piece for recording and tracking vocals and mic’d applications in the analog and digital domain. The 376 Tube Channel Strip w/Digital Output is the latest addition to the Silver Series family. The 376 puts the best of both worlds into one affordable package by combining the warmth of the vacuum tube, with the proprietary dbx Type IV conversion system. The 376 boasts many of the same features as other products in the Silver Series, such as +48V phantom power, a phase invert switch, and low cut filtering. In addition, the 376 also offers digital output capabilities in both AES/EBU, and S/PDIF formats as standard features. The high impedance, 1/4" instrument input located on the front panel, as well as the mic/line switch, and 20 dB pad show our dedication to providing convenience in the studio. The LED meters provide a clear and concise visual of the signal processing at a glance. The rear panel includes both mic and line inputs and outputs, word clock sync input and output, insertion jack and digital outputs. Add selectable sampling rates of 44.1 kHz, 48 kHz, 88.2 kHz, or 96 kHz; selectable dithering and noise shaping; and separate analog and digital output controls to this already impressive list of features, and we think you’ll agree that the 376 lives up to the uncompromising standards of dbx Professional Products.

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

  • +48 Volt phantom power
  • 200V tube plate voltage
  • 24, 20 and 16 bit wordlengths
  • 3-Band Parametric EQ
  • 8 segment analog or digital meter
  • AES/EBU and S/PDIF digital outputs
  • Compressor
  • De-Esser
  • Drive meter LEDs
  • Front panel instrument input
  • Selectable dither and noise-shaping algorithms
  • Selectable mic/line switch
  • Selectable sampling rate (96, 88.2, 48, 44.1kHz)
  • Threshold and De-Esser meters
  • Tube microphone pre-amp
  • Type IV conversion system
  • Word clock sync input and output

Specifications

    General
  • Analog Connector: Male XLR Pin 2 Hot and TRS 1/4"
  • Analog Frequency Response: <10Hz to 75kHz
  • Analog Impedance: Balanced 120O, unbalanced 60O
  • Analog to Digital Conversion Dither Type: TPDF, SNR2, or none
  • Analog to Digital Conversion Noise Shape: Shape 1, Shape 2, or none
  • Analog to Digital Conversion Output Format: S/PDIF or AES/EBU
  • Analog to Digital Conversion Sample Rate: 96, 88.2, 48, or 44.1kHz selectable
  • Analog to Digital Conversion type: dbx Type IV A/D Conversion System
  • Analog to Digital Conversion Wordlength: 24, 20, or 16 bit selectable
  • Analog Type: Servo-balanced/unbalanced
  • Compression Ratio: Variable; 1:1 to Infinity:1; 60 dB maximum Compression
  • Compressor Attack Time: Program-dependent; Typically 5 ms (SLOW disabled), 15 ms
  • Compressor Release Time: Program-dependent; Typically 50 dB/sec (SLOW disabled), 8
  • Convertor Dynamic Range: 107dB typical, A-weighted, 22kHz bandwidth
  • De-Esser Characteristic: Wideband gain reduction
  • De-Esser Frequency Range: 800 Hz to 10 kHz High Pass
  • De-Esser Release Time: 12 dB/octave program-dependent; approximately 1 ms/dB
  • Digital Output Connectors: XLR for AES/EBU, RCA for S/PDIF
  • Digital Output Impedance: 110O for AES/EBU, 75O for S/PDIF
  • DRIVE Control Range: +30dB to +60dB for Mic Input, -15dB to +15dB for Line and Instrument Inputs
  • Equivalent Input Noise: Typically -120 dBu with a 150O source load, 20Hz to 20kHz, BW
  • Gain (all bands): Sweepable from –15 to +15 dB
  • Gain (Drive Control): -15dB to +15dB
  • HIGH Frequency: 12 kHz, shelving filter
  • Insert Connector: TRS 1/4"
  • Insert Impedance: 100O (SEND), 20kO (RETURN)
  • Insert Type: Unbalanced
  • Instrument Input Connector: TS 1/4" Jack
  • Instrument Input Impedance: 470 kO
  • Instrument Input Type: Unbalanced
  • LINE: Selects between microphone and line inputs
  • Line Input (Rear Panel)Connector: TRS 1/4" Jack
  • Line Input CMRR: >40dB, Typically 55dB
  • Line Input Impedance: 20kO unbalanced, 40kO balanced
  • Line Input Type: Electronically balanced/unbalanced
  • LOW CUT: 75Hz, 12dB/octave high pass filter
  • LOW Frequency: 80 Hz, shelving filter
  • Maximum Analog Output Level: >+21 dBu, >+20 dBm (into a 600O load)
  • Maximum Input Level: -9 dBu or +11 dBu with 20 dB pad engaged
  • Maximum Instrument Input Level: +21dBu unbalanced
  • Maximum line Input Level: +21dBu balanced or unbalanced
  • Microphone Input CMRR: >40dB, Typically 55dB
  • Microphone Input Connector: Female XLR Pin 2 Hot
  • Microphone Input Impedance: 330O
  • Microphone Input Type: Electronically balanced/unbalanced
  • MID Frequency: Sweepable from 100 Hz to 8 kHz, bandwidth 1.5 octaves
  • Operating Voltage: DO: 120VAC 60Hz, 100VAC 50/60Hz, EU: 230VAC 50/60 Hz
  • Output Level Control Range: -20dB to +20dB
  • PAD: 20dB pad
  • Phantom Power: +48V
  • PHASE: Reverses pins 2 and 3 of the microphone input XLR
  • Power Requirements: 35 Watts
  • THD+Noise: 0.35% typical at +4dBu out, 1kHz, 40 dB gain
  • Threshold Characteristic: Selectable OverEasy or Hard Knee
  • Threshold Range: -40 dBu to +20 dBu
  • Word Sync Connectors: BNC
  • Word Sync Input: 96, 88.2, 48, or 44.1kHz word clock
  • Word Sync Input Impedance: 75O terminated by internal jumper
  • Word Sync Output: 96, 88.2, 48, or 44.1kHz word clock

 

Applications

  • None Available

Aliases

  • None Available