1046 - DBX 1046 Quad Compressor Limiter - Provides 4 channels of...
- Part Number:
- 1046
- Model Number:
- 1046
- Make:
- DBX BY HARMAN
- Lead Time:
- Available
- Qty In Stock:
- Available
DBX 1046 Quad Compressor Limiter - Provides 4 channels of smooth classic dbx OverEasy or Hard Knee compression Simple Type: Audio Processing & Recording
In today's recording and sound reinforcement environments, the need for multiple channels of high quality, easy to use compression is growing rapidly. The new dbx® 1046 is designed to provide the audio professional with just that: 4 channels of great sounding dbx compression for a variety of applications. Incorporating the industry standard dbx designs and the latest available manufacturing techniques, the dbx 1046 provides pristine sonic quality with that classic dbx sound. The 1046 provides 4 channels of smooth classic dbx OverEasy or Hard Knee compression that are perfectly suited for use on individual tracks of your multitrack recorder, and in virtually all applications the separate channels can be individually interfaced and used for entirely independent purposes. Additionally the newly developed PeakStopPlus™ is ideal for protecting your system from the oppressive peaks that can take out valuable drivers in your sound reinforcement rig or studio monitors.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Classic dbx compression
- Differentially balanced gold-plated XLR and 1/4" inputs and outputs
- Dual True stereo or quad mono operation
- Four independent channels of operation, stereo linkable in two pairs
- Independent Threshold and ratio controls
- PeakStopPlus limiting control for setting maximum allowable level regardless of compressor settings
- Precision metering of input level, output level, and gain reduction
- Switchable +4dBu or -10dBV operation per channel
- Switchable OverEasy or Hard Knee compression
- True RMS level detection
Specifications
- 200-240 VAC: 125 mA Type T
- Bandwidth: 20 Hz to 20 kHz, +0/-0.5 dB
- Bypass: Activates the direct input-tooutput hard-wire bypass
- Compressor Attack Time: Program-dependent
- Compressor Attack/Release Characteristic: AutoDynamic
- Compressor Output Gain: -20 to +20 dB
- Compressor Ratio: 1:1 to 8:1
- Compressor Release Time: Program-dependent
- Compressor Threshold Characteristic: Selectable OverEasy or hard knee
- Compressor Threshold Range: -40 dBu to +20 dBu
- Dimensions: 1.75"Hx19"Wx9"D (4.4cmx48.3cmx20.1cm)
- Dynamic Range: > 118 dB, unweighted
- Frequency Response: 0.35 Hz to 90 kHz, +0/-3 dB
- Function Switches: LED indicator for each front panel switch
- Fuse: 100-120 VAC:250 mA Slow Blow
- Gain Reduction Meter: 8 segment LED bar graph at 1, 3, 6, 10, 15, 20, 25, and 30 dB
- I/O Meter: Switches between monitoring input and output levels on the Input/Output Level meter
- IMD: < 0.1% SMPTE
- Input CMRR: typically >50 dB at 1 kHz
- Input Connectors: XLR and 1/4" TRS (Pin 2 and tip hot)
- Input Impedance: Balanced > 40 kOhm, unbalanced >20 kOhm
- Input Type: Electronically balanced/unbalanced, RF filtered
- Input/Ouptut Meter: 8-segment LED bar graph at -24, -18, -12, -6, 0, +6, +12, and +18 dBu
- Interchannel Crosstalk: < -80 dB 20 Hz to 20 kHz
- Limiter Type: PeakStopPlus two-stage limiter
- Limitor Ratio: 8:1
- Limitor Threshold Range: 0 dBu to +24 dBu (off)
- Mains Connection: IEC receptacle
- Max Input Level: > +22 dBu balanced or unbalanced
- Max Output Level: > +22 dBm balanced, > +20 dBm unbalanced
- Noise: < -96 dBu, unweighted, 22 kHz measurement bandwidth
- Operating Level (rear panel): Switches the nominal operating level between -10 dBV and +4 dBu simultaneously for both input and output levels
- Operating Voltage: Switchable: 100-120 VAC 50- 60 Hz or 200-240 VAC 50/60 Hz
- Output Connectors: XLR and 1/4" TRS (Pin 2 and tip hot)
- Output Impedance: Balanced 30 Ohm, unbalanced 15 Ohm
- Output Type: Servo-balanced/unbalanced, RF filtered
- PeakStop: 1 LED to indicate PeakStop limiting
- Power Consumption: 20 Watts
- Shipping Weight: 7.6 lbs. (3.5 kg)
- ST Link: Links channels in stereo pairs. Channels One and Three become the master channels
- Stage 1: PeakStop brickwall limiter
- Stage 1 Attack Time: Zero
- Stage 1 Release Time: Zero
- Stage 2: Predictive intellligent program limitor
- Stage 2 Attack Time: Program-dependent
- Stage 2 Release Time: Program-dependent
- Stereo Coupling: True RMS Power Summing
- THD+Noise: 0.008% typical at +4 dBu, 1 kHz unity gain, 0.08% typical at +20 dBu, 1 kHz, unity gain, < 0.1% any amount of compression up to 40 dB, 1 kHz
- Weight: 5.2 lbs. (2.4 kg)
Applications
- None Available
Aliases
- None Available
